| 1 |
Dimensions |
I.D, O.D, Thickness, Length,
Radius, Profile |
|
| 2 |
Rheometer |
The Cure & Processing Characteristics
of Rubber Compound, as well as Physical Properties of the Material. |
|
| 3 |
Hardness |
Resistance to Permanent
Indentation. Toughness and Softness |
|
| 4 |
Tensile Strength |
Rupture of a Specimen of Rubber Material. |
|
| 5 |
Elongation Break |
Stretching Strength of Rubber |
|
| 6 |
Heat Ageing |
Degradation of Physical Properties as Result of Exposure to
High & Low Temperature Conditions. To predict the Performance of Material
over Longer Times. |
|
| 7 |
Oil/Liquid Ageing & Volume Swell |
Softening & Increase in the Physical Size caused by the
Swelling Action of a Liquid due to Absorption |
|
| 8 |
Compression Set |
Permanent Deformation of Rubber when a Certain Force at
Certain Time and Temperature is applied and is Removed. |
|
| 9 |
Tension Set |
Recover Property after Stretched and Retract with Proportion of
Applied Strain for a Certain Time and Temperature. |
|
| 10 |
Adhesion |
Bond Strength between Rubber to Fabric/Yarn or Rubber to
Metal/Plastic |
|
| 11 |
Specific Gravity |
Weight of Product by Volume |
|
| 12 |
Leakage |
Failure due to Seeping of Liquid/Gas from Tube and Joint Areas |
|
| 13 |
Bursting Pressure |
How much Pressure of Liquid/Gas at Certain Temperature a
Tube/Hose can Take/Withstand before Bursting |
|
| 14 |
Ozone and Weather |
Cracking & Ability to Withstand Weathering factors, such
as: Oxygen, Ozone, Atmospheric Pollutants, Erosion, Temperature Cycling and
Ultraviolet Radiation. |
|
| 15 |
Special Test as per Customers Requirement |
Besides above In House Tests Facilities, any other Test if
Required can be arranged to Test from outside Certified Laboratory |
|
